Hardware problems are quite difficult to tackle, worse if under Windows. Windows is very nasty when it comes to hardware.
Identifying problem in computer hardware
Always calm down. Try to solve the problem yourself before resolving to formatting or sending to your computer dealer. First, know what's happening and the cause of it. In my case, the installation must have overwrite my old setting and replaced the wrong file. There must be a reason why Windows is acting improperly.
Logging Back On
First, try to log back on. If you can't log into Windows, don't panic. Restart the computer. When the text "Starting Windows 98..." appears, press F8. A menu will appear. Choose "Safe Mode" to continue. Safe mode will take some time to load. When you are in Windows, go to Control Panel, System. Click on the Device Manager tab. Find the faulty hardware driver and delete it. Open autoexec.bat and config.sys (both are hidden files in your root directory) with notepad. If the hardware is a CD-ROM or sound card, it will probably write add some lines. Check whether there are backup file (autoexec.bak, autoexec.b~k e.g.) since most installation will back up the two important files. If there is, simply replace them with the backup files. If there isn't, put "REM " in front of every line that loads the hardware.
Hardware Repair
When you restart, your computer is probably ok, since you have deleted all instances of the hardware drivers. But the hardware isn't functioning. re-install the hardware drivers, restart and you're done! If the problem persists, your probably have a system conflict go to the next page for more.
Identifying problem in computer hardware
Always calm down. Try to solve the problem yourself before resolving to formatting or sending to your computer dealer. First, know what's happening and the cause of it. In my case, the installation must have overwrite my old setting and replaced the wrong file. There must be a reason why Windows is acting improperly.
Logging Back On
First, try to log back on. If you can't log into Windows, don't panic. Restart the computer. When the text "Starting Windows 98..." appears, press F8. A menu will appear. Choose "Safe Mode" to continue. Safe mode will take some time to load. When you are in Windows, go to Control Panel, System. Click on the Device Manager tab. Find the faulty hardware driver and delete it. Open autoexec.bat and config.sys (both are hidden files in your root directory) with notepad. If the hardware is a CD-ROM or sound card, it will probably write add some lines. Check whether there are backup file (autoexec.bak, autoexec.b~k e.g.) since most installation will back up the two important files. If there is, simply replace them with the backup files. If there isn't, put "REM " in front of every line that loads the hardware.
Hardware Repair
When you restart, your computer is probably ok, since you have deleted all instances of the hardware drivers. But the hardware isn't functioning. re-install the hardware drivers, restart and you're done! If the problem persists, your probably have a system conflict go to the next page for more.
See Also
computer support in
technical support for small businesses
Self to Do Computer Troubleshooting Tips
Top five steps to stay secure on Internet
Increase your internet speed by 20 percent
0 comments:
Post a Comment